The Curt # C13702 Adjustable Width Trailer Hitch Receiver isn't an RV specific item. As long as the frame members of your 2021 Forest River Cherokee Arctic Wolf 3550 are between 18 and 51 inches apart, measured outside to outside, the hitch will fit. If the frame member to frame member width is greater than that, use # 82201 which fits frame widths up to 71 inches. view full answer...
Ask and you shall receive; as long as your travel trailer has a frame width of between 22 inches and 66 inches from outside to outside, then for a hitch with a 5,000 lb towing and 500 lb tongue weight capacity you can use the following:
- Adjustable Width Trailer Hitch Receiver for RVs # C13704 view full answer...
I have a potential solution for you but unfortunately there is not any document or anything that tells me what leaf springs you would have on your 2019 Arctic Wolf 315tbh8. That being said, the reason you are getting that off measurement is a combination of them being flat and that you measured with the weight on them, you want to get the measurement when unloaded.
More than likely what you have are the 25-1/4 inch length. Since you mentioned wanting to have higher rated leaf springs you... view full answer...
We have a vent cover that can work for your 2021 Forest River Cherokee Arctic Wolf 287BH 5th wheel trailer. It is a universal fit from Fan-Tastic Vent for vents that measure 14-1/4" x 14-1/4" at the roof opening:
- Fan-Tastic Vent Ultra Breeze Trailer Roof Vent Cover # FVU1500WH view full answer...
I am almost positive that the MORryde SRE4000 # MR97ZR will work for your 2019 Forest River Cherokee Artic Wolf 315tbh8. I recommend using the Qualifier guide posted on the product page under alternate instructions to ensure we have the correct kit for you (Also included in below pictures). There are several steps that you will have to confirm are specific to your unit such as the frame hanger, wheelbase measurement and if there is any obstructions such as plumbing that may interfere with... view full answer...
We currently do not carry any cameras that would link into the "Invisible Trailer" feature to be able to use your dash monitor. You would need to go through GM to get a camera that would link up and it would most likely have to be hard wired from the camera to the dash.
The Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 4.3" Screen # FOS43TASF has a wireless connection from the camera to the monitor. It's a very easy setup and most newer 5th wheels are... view full answer...
There's crossover; the 15123 and LM67048 have the same inner diameter, so they fit the same spindle, and often hubs fit both 5,200 lb and 6,000 lb axles. So you are perfectly okay with what you have and the correct replacement bearing kit for 25580 and 15123 is the following:
- Bearing Kit, 15123/ 25580 Bearings, 10-36 Seal # BK3-100 view full answer...
Yes, the specs I'm seeing for your 2021 Arctic Wolf 287BH 5th Wheel show it being 34' so the Adco SFS AquaShed RV Cover for 5th Wheel Toy Hauler # 290-52256 would be the correct fit. This cover works best for short term storage in the green and yellow climates of the map pictured below. The zippered side panels are constructed of non-abrasive, triple-layer polypropylene that breathes to eliminate moisture build-up, mold, and mildew and will allow access to cargo bays and doors without complete... view full answer...
You can definitely use the MORryde suspension bolts if that's what you're wanting to use. The correct kit depends on what your trailer is currently equipped with and how long your shackle straps are (see attached photo of where to measure).
If you have the Road Armor and Correct Track
2-1/4" Shackle Straps - # MR58ZR
3-1/8" Shackle Straps - # MR98ZR
If you only have the Road Armor
2-1/4" Shackle Straps - # MR46ZR
3-1/8" Shackle Straps - # MR76ZR
We always recommend when you do something... view full answer...
Since your current equalizers measure 6-1/2" you will want to replace them with the MORryde Rubber Equalizers for Tandem Axle Trailers item # MR87ZR. They both work with 8,000 lbs axles so don't worry about the wheel base.
I have linked an installation video below.
Since you are replacing your equalizers, I recommend replacing your shackles and upgrading your wet bolts. If you have 2-1/4" shackles you will need item # MR46ZR. If you have 3-1/8" shackles you will want item # MR76ZR.... view full answer...
Go To Results